Facilities

Located in Baroda, Michigan, just eight minutes from I-94.

• Production Building - 40,000 sq. ft. on 12 acres
• Engineering and Tooling Building - 12, 000 sq. ft. on 2 acres

Equipment

Aluminum Die Cast Machines

• 2 - 550 ton B&T
• 1 - 500 ton Fort
• 1 - 700 ton Prince
• 2 - 850 ton B&T
• 2 - 700 ton B&T
• 2 - 950 ton Prince

• 1 - 50 lb. Advance Ladeler
• 9 - 40 lb. 305 Rimrock Ladelers
• 4 - Rimrock Sprayers
• 1 - Advance Sprayer

• 1 - 550T B&T
• 2 - 500 ton Fort

• 2 - 75 ton Hannifin
• 1 - 80 ton Modern
• 2 - 50 ton B&T
• 3 - 10 ton Rapid
• 4 - 30 ton B&T Rapid
• 2 - 25 ton B&T

Note: All are 4-post presses                         

Melting Furnaces

• 2 - 7000# Plibrico Gas Reverbs   ALUM
• 1 - 2000# Eclipse Dry Hearth Reverb ALUM
• 1 - 2000# M.P.H. Gas Reverb   ALUM
• 1 - 3000# Crucible Furnace   ALUM
• 9 - 1200# Gas Fired Holder ALUM
• 2 - 3000# Crucible Gas Fired Melter   ZINC
• 3 - 1200# Crucible Gas Fired Holding ZINC
• 1 - 2000# Gas Fired Breakdown ALUM

Other Equipment

• 1 - 250 PSI 25 HP Ingersoll Rand Compressor
• 3 - 125 PSI 25 HP Ingersoll Rand Compressors
• 1 - 125 PSI 25 HP Kellogg Compressor
• 1 - 2 ton Overhead Crane 30 x 30
• 1 - 3 ton Overhead Crane 30 x 65
• 1 - 10 ton Overhead Crane 40 x 80

Tool Room Equipment

• Monarch Lathes: 10EE, 14 x 50, and 14 x 24
• Surface Grinders: 8 x 24 Thompson and 8 x 12 Covel
• Radial Drills: 6" column x 36" Johansson; 12" x 48" Johansson; and 16" x 36"
• 3 - Bridgeport Mills, 2 are DRO
• 5 - Lead Screw Tapping Machines
• 3 - Snow Tapping Machines
• Over 20 Drilling or Reaming Stations
• 2 - Portable Die Vacuum Unites
• 3 - 12" x 16" Vertical Cut Off Saws
• 3 -10" x 24" Horizontal Saws